 |
|
ABB ACS 140 AC Drives
|
|
For speed control of 0.5 to 3.0 HP AC motors
200 to 240 V, 1 Ph and 3 Ph |
|
|
|
Standard Features
|
Additional Information
|
- UL Listed
- CUL Listed
- CE marking
- Control Panel Keypad
- Two (2) Analog Inputs
- Five (5) Programmable Digital Inputs
- One (1) Programmable Analog Output
- Input Speed Signals
- Current 0(4) - 20 mA
- Voltage 0(2) - 10 VDC
- PID Setpoint Controller
- Eight (8) Built-in Application Macros
- Start/Stop
- 2 Wire
- 3 Wire
- Application of Input Power
- All Control Inputs Isolated From Ground and Power
- Protection Circuits
- Over Current
- Short Circuit
- Ground Fault
- Over Voltage
- Under Voltage
- Over Temperature
- Motor Overload Protection
- Electronic Reverse
- Two (2) Critical Frequency Lockout Points
- Seven (7) Preset Speeds
- Two (2) Independently Adjustable Accel and Decel Ramps
- DC Injection Braking
- Ramp Or Coast To A Stop
- Programmable Maximum Frequency to 250 Hz
- V/Hz Shape
- IR Compensation
- Linear Or "S" Curve Accel Ramp
- Auto Restart - Customer Selectable and Adjustable
- Start Functions
- Ramp
- Flying Start
- Torque Boost
- Sleep and Wake-up Mode
- Modbus Serial Communications
|
|
| Optional Features |
- Extended Control Panel Cable
- RFI Filters to meet CE requirements for First Environment
- Dynamic Braking Chopper and Resistor
- RS232/485 Serial Communication Interface Card
- Drive Tools programming software
|
|
|
|
